NuFlex 302 Bath & Kitchen Silicone Sealant

NuFlex 302 Bath & Kitchen Silicone Sealant is a 100% medium modulus, one component caulking material with a consistency similar to that of toothpaste. NuFlex 302 cures to form a tough, rubbery solid upon exposure to moisture in the air. Because it does not flow due to its own weight, the ceiling can be applied overhead or on sidewall joints and surfaces without sagging, slumping or running off. It adheres to clean metal, glass, most types of wood, silicone resin, vulcanized silicone rubber, ceramic, natural and synthetic fiber, painted surfaces and many plastics. NuFlex 302 has good resistance to weathering, vibration, moisture, ozone and extreme temperatures. It may be applied in sub-zero weather without loss of extrusion or physical property characteristics and is effective to -46° C (-50° F).

NuFlex 302 General Purpose Silicone Sealant

NuFlex 302 General Purpose Silicone Sealant is a 100% medium modulus, one component caulking material with a consistency similar to that of toothpaste. NuFlex 302 cures to form a tough, rubbery solid upon exposure to moisture in the air. Because it does not flow due to its own weight, the ceiling can be applied overhead or on sidewall joints and surfaces without sagging, slumping or running off. It adheres to clean metal, glass, most types of wood, silicone resin, vulcanized silicone rubber, ceramic, natural and synthetic fiber, painted surfaces and many plastics. NuFlex 302 has good resistance to weathering, vibration, moisture, ozone and extreme temperatures. It may be applied in sub-zero weather without loss of extrusion or physical property characteristics and is effective to -46° C (-50° F).

NuFlex 302 Hi-Temperature Silicone Sealant

NuFlex 302 Hi-Temperature Silicone Sealant is a one-part non-slumping silicone sealant with the consistency of toothpaste. It cures when it is exposed to moisture in the air to form a tough rubbery seal. NuFlex 302 Hi-Temp was formulated to perform at temperatures ranging from –65° to 260°C (-85° to 500°F) under continuous operating conditions. During intermittent exposure, NuFlex 302 Hi-Temp will withstand temperatures as high as 316°C (600°F). It is ideal for a number of sealing and bonding applications. The high temperature properties of NuFlex 302 Hi-Temp make it ideally suited for: Sealing and encapsulating heating elements in appliances, aerospace gasketing, moving oven belts, industrial ovens and bag filters on smoke stacks. Other critical bonding, sealing, potting, encapsulating and protective coatings where parts must perform at high temperatures. There are also many applications for NuFlex 302 Hi-Temp in and around automobiles, RV's, boats and in small engines such as: Making and/or replacing expensive paper and cork gaskets in water pumps, timing chain/belt covers, rocker covers, heat risers, and any area where high temperatures and vibration are prevalent. NuFlex 302 Hi-Temp is oxygen sensor safe. Do not use in direct contact with fuels such as gasoline or diesel fuel.

NuFlex 309 Metal & Vinyl Silicone Sealant

NuFlex 309 Metal & Vinyl Silicone Sealant is a one-part, neutral-cure elastomeric silicone sealant that cures to form a durable, flexible, low modulus sealant that is compatible with common building materials. NuFlex 309 is particularly effective for sealing construction joints such as those found in precast concrete, curtainwall and mullion joints. It forms a durable, flexible, watertight bond with most building substrates in any combination: masonry, ceramics, galvanized steel, aluminum and most plastics. It is virtually unaffected by ultraviolet radiation, ozone, airborne chemicals or extreme temperatures.

NuFlex 311 Self-Leveling Silicone Sealant

NuFlex 311 Self-Leveling Silicone Sealant is a flowable, one-part, neutral-cure, elastomeric silicone sealant that cures to form a durable, flexible, low modulus sealant. The self-levelling property means reduced labor cost since tooling is not required. NuFlex 311 can be used for the following; sealing horizontal expansion and control joints in parking garages, driveways, swimming pool decks, concrete floors and sidewalks.

NuFlex 313 Fast-Cure Glass & Vinyl Silicone Sealant

NuFlex 313 Fast-Cure Glass & Vinyl Silicone Sealant is a one-part, silicone sealant that exhibits accelerated development of it's surface elastic properties and provides excellent unprimed adhesion to a wide variety of substrates. NuFlex 313 is particularly effective in industrial sealing and adhesive applications where rapid curing characteristics are required. At 23°C (77°F) and 50% relative humidity, NuFlex 313 has a skin-over time of 7 minutes, a tack-free time of 15 minutes and a light surface scratchresistance time of 30 minutes. NuFlex 313 forms a flexible, durable, watertight bond to glass, aluminum, wood, galvanized steel, most metals, most vinyl and plastics. It is virtually unaffected by ultraviolet radiation, ozone, air-borne chemicals or temperature extremes.

NuFlex 319 Glazing Silicone Sealant

NuFlex 319 Glazing Silicone Sealant is a one-part, high modulus, non–corrosive moisture curing 100% silicone sealant. NuFlex 319 has superior adhesion to most construction materials without the need for a primer. NuFlex 319 cures to form a flexible, watertight bond to glass, plastic, metal, concrete and masonry, factory and field installed metal building systems. Conventional glazing Weather seal around doors and windows Sealing around metal building flashings, eavestroughs and fittings Factory made windows as the primary seal/bedding compound A l l joints and glazing pockets should be free of dirt, grease, oil, moisture and old sealants or glazing compounds. Primeless non-corrosive, no offensive odours all season gunnability – from –37°C to 60°C (-38° to 140°F) durable – unaffected by sunlight, rain, freeze/thaw conditions, ozone or air-borne chemicals and long Life – cured sealant remains permanently flexible and will not shrink, crack, dry out or become brittle.

NuFlex 331 Exterior Trim Silicone Sealant

NuFlex 331 Exterior Trim Silicone Sealant is a primerless, non-corrosive 100% neutral cure silicone that exhibits low modulus, high adhesive qualities after cured. NuFlex 331 is a high-quality, ready-to-use silicone that has a very high level of adhesion, especially to substrates such as PVC and many plastics which have typically shown difficulty adhering with silicone sealants. NuFlex 331 is unaffected by UV and air-borne chemicals. Utilized for multiple glazing applications where a clear, high-adhesion product is preferred. Factory-made windows as primary seal/bedding compound; window installation (especially with wood finishes); vinyl siding installation; factory and field installed metal building systems; appliance manufacturing; aircraft and automotive glazing and manufacturing.

NuFlex 333 Aquarium Silicone Sealant

NuFlex 333 Aquarium Silicone Sealant is a one-part, moisture curing, 100% silicone sealant that has been specially formulated for the construction of aquariums. It will never shrink, dry out or crack; remains permanently flexible and is harmless to fish and plants. NuFlex 333 permits the building of aquariums with an unobstructed view of the fish not available in conventional ''framed'' aquariums. It also makes it possible to make three, five, six or more sided aquariums that are not normally available and they can be divided into compartments, integrated into coffee tables or even be made to look like a picture frame in a wall. Experts recommend the use of 6.4 mm (1/4'') plate glass for most tanks up to 120 litres (30 U.S. gals) because of the ''clear vision'' through the plate glass.

NuFlex 366 Marine Silicone Sealant

NuFlex 366 Marine Silicone Sealant is a 100% medium modulus, one component caulking material with a consistency similar to that of toothpaste. NuFlex 366 cures to a tough, rubbery solid upon exposure to moisture in the air. Because it does not flow due to its own weight, this sealant can be applied overhead or on sidewall joints and surfaces without sagging, slumping or running off. It adheres to clean metal, glass, most types of wood, silicone resin, vulcanized silicone rubber, ceramic, natural and synthetic fiber, painted surfaces and many plastics. NuFlex 366 has good resistance to weathering, vibration, moisture, ozone and extreme temperatures. It may be applied in sub-zero weather without loss of extrusion or physical property characteristics and is effective to –46°C (-50°F). NuFlex 366 can be used for the following: 1) Caulking and sealing a round bathtubs, shower stalls, bathroom vanities, kitchen counters, sinks, windshields, deck hard w a re, portholes and hull fixtures, above the water line. 2) For making gaskets to replace costly paper gaskets, for timing chain and valve covers and for water pump thermostat housings. 3) Any application that requires a permanently flexible waterproof seal that will withstand moisture, heat and vibration.